Filter
Top Products
Specifications A-3
This product can be used with a single- to three-phase power converter,
only as specified in the Site Preparation Guide, part number 0700116.
Required power cord (supplied with printer):
• Part No. 0506213 North America (UL/CSA approved), length 19.7
feet (6 m), OR
• Part No. 0602650 Europe (Harmonized), length 19.7 feet (6 m)
Optional auxiliary power for vacuum system:
Supplied 24 volt DC power supply with universal adapters, connected
from the auxiliary power jack on the vacuum/pressure assembly to one of
the following:
1. Printer’s patch panel power outlet (configuration as shipped) — if the
power cord to the printer is removed, power to the vacuum system is
removed. If the printer standby power switch is switched off, but the power
cord is not removed, power to the vacuum system is preserved.
2. Wall outlet — 100-240 VAC, 50/60 Hz, provides temporary power to the
vacuum system when it is necessary to remove power from the printer for
service.
3. UPS — customer-supplied uninterruptable power supply, output 100-
240 VAC, 50/60 Hz, minimum of 15 watts of power, provides battery
backup to the vacuum system in the event of a power failure. UPS is con-
nected to the electric wall outlet.
Printing Technology 16 piezo-electric inkjet printheads utilizing Micro-Quad™ Jet Technology.
Resolution 600 x 600 dpi, 600x300 dpi (as supported by the RIP)
Ink HP Scitex FB240 4-color (CMYK) flexible UV cure inks, off-head ink sys-
tem.
Curing System Dual carriage-mounted 850-watt shuttered UV lamps.
Print Speeds (bidirectional) Unidirectional modes (right-only or left-only) print in approximately half the
speed of the corresponding bidirectional modes.
Billboard 600x300
811 ft
2
/hr (75.4 m
2
/hr)
Billboard 600x600
438 ft
2
/hr (40.7 m
2
/hr)
Production 600x300
438 ft
2
/hr (40.7 m
2
/hr)
Production 600x300
225 ft
2
/hr (20.9 m
2
/hr)
High Quality 600x300
225 ft
2
/hr (20.9 m
2
/hr)
High Quality 600x600
112 ft
2
/hr (10.4 m
2
/hr)