Filter
Top Products
A-4 Specifications
Vacuum/Pressure System Nominal relative vacuum: 5.0 inches H
2
O
Maintains negative relative pressure at the printheads and provides air
pressure for purging. Since relative pressure is maintained, the printer can
be operated at various altitudes above or below sea level without adjust-
ments to the system.
Compressed Air Customer-supplied (shop air), 80-100 psi (5.6-8.4 Kg/cm), required for
media handling system.
Media Handling Vacuum belt media drive for easy loading and accurate media feeding.
Pneumatically-operated media rollers and media alignment bar.
Front and rear roller tables support rigid materials up to 98.4 inches (250
cm) in width and 80 inches (203 cm) in length, 125 pounds (56.7 kg) in
weight.
A second set of roller tables (optional) extends the support of rigid materi-
als up to 150 inches (381 cm) in length.
Optional Supply & Take-up system supports up to 98.5-inch-wide (2.5 m)
roll-fed media on 3-inch cores.
Maximum Media Thickness 2.75 inches (70 mm).
Maximum Print Width 98.4 inches (250 cm).
Edge-to-edge printing in both width and length of rigid media.
Maximum Print Length
(rigid media)
400 inches (1016 cm).
Minimum printable
rigid sheet size
Width:
Length:
6 inches (15 cm)
9 inches (23 cm)
Software Features Touch screen with graphical interface.
Automatic calibration and detection/substitution of missing jets.
Media Wizard stores operational parameter sets by media type for subse-
quent recall.
Automatic edge detection and media positioning.
Automatic head clearance above media.
Stored Jobs feature stores print jobs on the printer for reprinting