Filter
Top Products
ENWW Installing supplies 191
7
10 On the front side of the printer, locate the blue transfer-roller handle
beneath the large green lever. Grasp the handle and pull the used roller out
of the printer.
11 Unpack the new roller and set it on a clean, flat surface. Carefully remove
the protective sheet.
CAUTION
Do not touch the black foam roller, and take care not to scratch the
underside of the belt as you insert the roller into the printer.
12 Using one hand to support the underside of the roller, turn the roller to a
45-degree angle and align the roller with the slot. Slide the roller into the slot
until it stops completely.
10
11
12