Filter
Top Products
http://www.hp.com/support/lj9500
66 Chapter 4 – Improving print quality Rev. 1.0
Cleaning the fuser input area
Occasionally, toner and paper dust collects in the fuser input and can affect print quality. Use the following procedure to
clean the fuser input.
To clean the fuser input area
1 Open the front doors of the printer, and then swing the large green lever
down.
2 On the front side of the printer, locate the blue transfer-roller handle
beneath the large green lever. Grasp the handle and pull the roller out of the
printer. Set the roller on a clean, flat surface.
CAUTION
Do not touch the black foam roller, and take care not to scratch the
underside of the image transfer belt as you remove the roller from the
printer.
1
2