Filter
Top Products
ENWW Installing supplies 199
7
4 If the duplexer is installed, push down on the green duplexer-release tab.
Grasp the center handle and pull the duplexer out until it stops. It is not
necessary to completely remove the duplexer.
5 Rotate each blue fuser lever inward until it is in the horizontal position,
making sure not to pinch your fingers when the levers are released.
6 Using the black fuser handles, pull the fuser partially out of the printer. Grip
the handles firmly and pull the fuser out until it stops. Then lift the fuser out
of the printer.
WARNING
The fuser is heavy and might be hot. Be careful not to injure yourself when
removing the fuser.
4
5
6