Filter
Top Products
Installing a SIMM Board
Caution
SIMM boards and your printer controller
board can be damaged by small amounts of
static electricity. Wear an antistatic wrist
strap or touch the surface of the antistatic
package before touching a board. When
handling a board, wear an antistatic wrist
strap or frequently touch the antistatic bag or
bare metal on the printer.
1 In this order, switch the printer OFF (A)
and unplug the power cord (B) and any
attached cables (C).
2 Loosen (do not remove) the two captive
screws.
3 Grasp the screws and pull the printer’s
controller board out of the printer. Place it
on a flat, non-conductive surface. (For
ease of replacement, note how the board
fits into slots in the printer.)
4 Remove the SIMM board from the
antistatic package. Hold the board with
your forefingers on the side edges and
your thumbs against the back edge, so the
notch on one end is on the right and the
metal teeth face toward the SIMM slot.
2
4
1
3
D-2 Memory/Personality SIMM Installation