Filter
Top Products
Menu of Resets
Additional reset options are available through the Menu of Resets. You can
lose buffered page data or printer configuration data when you select this
option. Use it only in the following circumstances:
•
You want to restore the default printer settings.
•
Communication between the printer and computer is interrupted.
•
You are using both the Bi-Tronics parallel I/O port and MIO ports, and
one of the ports is not working properly.
To access the Menu of Resets:
1
Press
[On Line]
to take the printer off line.
2
Hold down both
[Shift]
and
[Reset]
for at least 10 seconds until
RESET=MENU*
appears on the display.
3
Use
[+]
or
[Shift]
+
[-]
to cycle through the items.
4
Press
[Enter]
to select your choice of resets.
5
Press
[On Line]
to execute the reset.
The following table shows the three reset options:
Menu of Resets
Option Selected Printer Response Explanation
RESET=MENU 09 MENU RESET RESET=MENU restores most of the printer’s factory
default settings. It also performs a reset.
Items in the Config, Memory Configuration and
Parallel Menus are not reset. RESET=MENU clears only
the active input buffer.
RESET=ACTIVE I/O 09 RST ACTIVE I/O RESET=ACTIVE I/O clears the input and output buffers
for the active I/O only and performs a simple reset.
RESET=ALL I/O 09 RESET ALL I/O RESET=ALL I/O clears the input and output buffers for
all I/Os and performs a simple reset.
4
Understanding the Control Panel 4-15