Filter
Top Products
Configuration Menu
Configuration Menu items can be selected only from the printers control
panel. You cannot temporarily change them in your software application.
Item Options Explanation
MP TRAY FIRST*
CASS
MANUAL
Draws paper from the MP Tray regardless of paper size..
MP TRAY=FIRST is not recommended for shared
environments.
Operates as a paper cassette. Paper feeds automati-
cally. Paper size must be selected with the
[MP[Paper]Size] key because the MP Tray cannot sense
the size of the paper. If the MP Tray is set as a cassette,
the Paper Cassette (or Lower Cassette) becomes the
default. The [MP Paper]Size] key works only when the MP
Tray is set to CASS.
Operates only as a manual feed tray.
LOCK NONE*
MP
PC
LC
and combinations
You can lock out a tray or a combination of trays so the
printer will not draw paper from it. (See “Reserving
Cassettes” in Chapter 3.) Lock-out options depend on
how the MP Tray is configured and whether an optional
500-sheet Lower Cassette (LC) is installed. When the
MP Tray is set to MANUAL or FIRST and no optional Lower
Cassette is installed, no paper sources are available to
be locked out. All possible options and their definitions
are as follows:
NONE
MP
PC
LC
PC MP
LC MP
LC PC
No trays or cassettes locked out.
The MP Tray is locked out.
The Paper Cassette is locked out.
The optional Lower Cassette is locked out.
Only the optional Lower Cassette is available.
Only the Paper Cassette is available.
Only the MP Tray is available.
*Factory default.
Table 4-6 Configuration Menu Items
4-10 Understanding the Control Panel