Filter
Top Products
Item Options Explanation
CLR WARN ON*, JOB A clearable warning indicates a transient condition in the
printer. The printer continues to function because it is still on
line.
When CLR WARN is set to ON, the last clearable warning
message displayed replaces 00 READY until you press [Shift]
+ [Continue]. When this item is set to JOB, the message
remains visible until the printer receives another job.
A number of clearable warning messages can appear for
each job to be printed, depending in the length and
complexity of the job. (See “Clearable Warnings” in
Chapter 8.)
AUTO CONT OFF*, ON The auto continue function determines how the printer
reacts to data and printer errors. When auto continue is set
to OFF, the printer displays a message and goes off line until
you press [Shift] + [Continue]. When auto continue is set to
ON, the printer displays a message and goes off line for
about 10 seconds, then comes back on line. If your printer is
part of a network or remote spooling system, set auto
continue to ON.
LOW TONER CONT*, STOP Determines printer’s response to the message,
16 TONER LOW, which indicates the printer senses the
cartridge is running out of toner. When LOW TONER=CONT, the
printer remains on line and continues to print after the
16 TONER LOW message appears; print quality may degrade.
When TONER LOW=STOP, the printer goes off line and waits for
the printer operator to take action. (See “Clearing the
TONER LOW Message” in Chapter 7.)
*Factory default.
Table 4-6 Configuration Menu Items
(continued)
4
Understanding the Control Panel 4-11