Filter
Top Products
Printing Menu
You can override or change any Printing Menu setting through most
software applications. When you change a setting from the printers control
panel, the new setting becomes the printers default value.
Item Options Explanation
COPIES 1* to 999 Select any number from 1 to 999.
PAPER
LETTER**, LEGAL,
A4***, EXEC, 11x17, A3,
JIS B4, JIS B5, CUSTOM
COM10**, MONARCH,
C5, DL***, B5, JPOST,
JPOSTD
Sets default image size at which printer formats page
unless a software setting overrides it.
ORIENTATION P*, L P means portrait (vertical) and L means landscape
(horizontal) orientation of print on the page.
FORM 5 to 128 LINES
(60** and 64***)
Sets vertical spacing, from 5 to 128 lines, for default
paper size. Scrolls in increments of 1 line.
MANUAL FEED OFF*, ON Available only through MP Tray. When Manual Feed is
on and the MP Tray is empty, the printer goes off line
when it receives a print job and displays MF FEED
paper size
or ME FEED
envelope size
. When you place
a sheet in the MP Tray, the printer goes back on line
and prints the sheet.
RET OFF, LIGHT, MEDIUM*,
DARK
Refines print quality of characters and graphics by
smoothing the fine gradations along the angles and
curves of the printed image. (See “Enhancing
Resolution” in Chapter 5.)
ECONOMODE OFF*, ON EconoMode substantially reduces the amount of toner
on the printed page; the result is similar to draft mode
on some dot matrix printers. (See “Saving Toner with
EconoMode” in Chapter 5.)
*Factory default. **Factory default for 110V printers. ***Factory default for 220V printers.
Table 4-3 Printing Menu Items
4
Understanding the Control Panel 4-7