Filter
Top Products
Printing Labels or Transparencies from
the MP Tray
Print labels and transparencies from the MP Tray to prevent them from
curling or jamming in the printer.
Caution
To avoid damaging the printer: Do not print labels or transparencies
from a Paper Cassette or optional Universal Lower Cassette. Do not print
on both sides of labels or transparencies.
Guidelines and Specifications
Use only labels recommended for laser printers. The labels must be
compatible with the heat and pressure of the fusing assembly process. See
Appendix C for media specifications.
Do not use labels that separate from the backing sheet or that are wrinkled
or damaged in any way. Do not feed a sheet of labels through the printer
more than once because the label adhesive is designed for only one pass
through the printer.
Use only transparencies recommended for use in laser printers, such as HP
or 3M overhead transparency film. Because transparency films tend to stick
to each other, remove each transparency from the output bin before printing
the next one.
For best results when printing labels and transparencies, use the loading
and printing procedures on the next page.
Printing Tasks 3-13