Filter
Top Products
Control Panel Menu Map
PRINTING MENU PCL MENU PS MENU JOB MENU
CONFIG
MENU
MEM CONFIG
MENU*
PARALLEL
MENU TEST MENU
COPIES FONT
SOURCE
PRT PS ERRS RESOLUTION MP TRAY IO BUFFER HIGH SPEED SELF TEST
PAPER
[ENVELOPE]
FONT
NUMBER
JAM
RECOVER
PERSONALTY LOCK IO SIZE ADV FNCTNS CONT SELF TEST
ORIENTATION PITCH or PT
SIZE
PWR SAVE CLR WARN RESRCSAVE PCL TYPEFACE LIST
FORM SYM SET IO TIMEOUT AUTO CONT PCL MEM PCL DEMO PAGE
MANUAL FEED LOW TONER PS MEM PS CONFIG PAGE
RET PS TYPEFACE LIST
ECONOMODE PS DEMO PAGE
You can change these menu items either from a software
application or from the printer’s control panel.
You can change these menu items only from the printer’s
control panel.
Shaded items appear when the PostScript language is installed.
* These items will appear if sufficient memory is available.
Additional menu items may appear if options are installed (such as MIO cards).
To select a menu item:
1 Press [On Line] to take the printer off line.
2 Press [Menu] repeatedly until the menu you want appears.
3 Press [Item] repeatedly until the item you want appears.
4 Press [+] repeatedly (or hold down [+] to scroll) until the setting you want
appears.
5 Press [Enter] to save your selection. An asterisk appears next to your
selection, indicating it is now the default.
6 Press [On Line] to place the printer back on line.
Note
Remember: When you change a control panel setting, it changes for all
installed languages, such as PCL, as well as for PostScript.
6-4 PostScript Printing