Filter
Top Products
Using printer information pages
From the printer control panel, you can print pages that give details about the printer and its current
configuration. The table below provides the procedures for printing the information pages.
Page description How to print the page
Menu map
Shows the control-panel menus and
available settings.
1. Press Menu.
2.
Press
to highlight INFORMATION, and then press .
3.
If PRINT MENU MAP is not highlighted, press
or until it is
highlighted, and then press
.
The content of the menu map varies, depending on the options currently installed
in the printer.
For a complete list of control panel menus and possible values, see
Using the
control-panel menus.
Configuration page
Shows printer settings and installed
accessories.
1. Press Menu.
2.
Press
to highlight INFORMATION, and then press .
3.
Press
to highlight PRINT CONFIGURATION, and then press .
NOTE If the printer contains an HP Jetdirect print server or an optional
hard disk drive, an additional configuration page prints that provides
information about those devices.
Supplies status page
Shows print-cartridge toner levels.
1. Press Menu.
2.
Press
to highlight INFORMATION, and then press .
3.
Press
to highlight PRINT SUPPLIES STATUS PAGE, and then press .
NOTE If you are using non-HP supplies, the supplies status page might
not show the remaining life for those supplies. For more information, see
HP policy on non-HP print cartridges.
Usage page
Shows a page count for each size of
paper printed, the number of one-
sided (simplexed) or two-sided
(duplexed) pages, and the average
percentage of coverage.
1. Press Menu.
2.
Press
to highlight INFORMATION, and then press .
3.
Press
to highlight PRINT USAGE PAGE, and then press .
96 Chapter 5 Managing the printer ENWW