Filter
Top Products
Specks might appear on a page after a jam has been cleared.
1. Print a few more pages to see if the problem corrects itself.
2. Clean the inside of the printer and run a cleaning page to clean the fuser. (See
Cleaning the
printer.)
3. Try using a different type of media.
4. Check the print cartridge for leaks. If the print cartridge is leaking, replace it.
Dropouts
1. Make sure that the environmental specifications for the printer are being met. (See Operating
environment.)
2. If the media is rough, and the toner easily rubs off, open the CONFIGURE DEVICE menu at the
printer control panel. Open the PRINT QUALITY submenu, select FUSER MODES, and then
select the media type you are using. Change the setting to HIGH1 or HIGH2, which helps the
toner fuse more completely onto the media. (See
Print Quality submenu.)
3. Try using a smoother media.
Lines
A
A
A
A
A
B
B
B
B
B
C
C
C
C
C
a
a
a
a
a
c
c
c
c
c
b
b
b
b
b
1. Print a few more pages to see if the problem corrects itself.
2. Clean the inside of the printer and run a cleaning page to clean the fuser. (See
Cleaning the
printer.)
3. Replace the print cartridge.
156 Chapter 7 Problem solving ENWW