4. Place the paper in the tray and make sure that it is flat at all four corners. Keep the paper below
the height tabs on the paper-length guide in the rear of the tray.
Lock
5. Set the paper-size switch (callout 1) and paper-size dial (callout 2) to the size of the paper that
you loaded.
Lock
Custom
21
6. Slide the tray into the printer.
Loading optional tray 3 (500-sheet tray)
Tray 3 supports only paper. For supported paper sizes, see Paper specifications.
NOTE The tray 3 500-sheet tray is standard with the HP LaserJet 5200tn and HP LaserJet
5200dtn printer models.
ENWW Configuring trays 67