HP (Hewlett-Packard) 5200 Series Printer User Manual


 
Replacing supplies and parts
Carefully follow the guidelines in this section when replacing printer supplies.
Supply replacement guidelines
To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the
printer.
Sufficient space is required above and in the front of the printer for removing supplies.
The printer should be located on a flat, sturdy surface.
For instructions on installing supplies, see the installation guides provided with each supply item or
see more information at
www.hp.com/support/lj5200.
CAUTION Hewlett-Packard recommends the use of HP products in this printer. Use of non-
HP products may cause problems requiring service that is not covered by the HP warranty or
service agreements.
Changing the print cartridge
When a print cartridge approaches the end of useful life, a message appears on the control panel
recommending that you order a replacement. The printer can continue to print using the current print
cartridge until a message appears instructing you to replace the cartridge.
To change the print cartridge
1. Open the front cover.
110 Chapter 6 Maintenance ENWW