Filter
Top Products
Configure Device menu
This menu contains administrative functions. The CONFIGURE DEVICE menu allows the user to
change the default printing settings, adjust the print quality, and change the system configuration and
I/O options.
Printing submenu
Some items on this menu are available in the program or printer driver (if the appropriate driver is
installed). Program and printer-driver settings override control-panel settings. In general, it is better to
change these settings in the printer driver, if applicable.
Item Values Explanation
COPIES 1 to 32000 Sets the default number of copies by selecting any number
from 1 to 32000. Use
or to select the number of
copies. This setting applies only to print jobs that do not have
the number of copies specified in the program or printer driver,
such as a UNIX or Linux program.
The default setting is 1.
NOTE It is best to set the number of copies in the
program or printer driver. (Program and printer-driver
settings override control-panel settings.)
DEFAULT PAPER SIZE Displays a list of
available media sizes.
Sets the default image size for paper and envelopes. This
setting applies to the print jobs that do not have a paper size
specified in the program or printer driver. The default setting is
LETTER.
DEFAULT CUSTOM
PAPER SIZE
UNIT OF MEASURE
X DIMENSION
Y DIMENSION
Sets the default custom paper size for tray 1. This menu
appears only if the media-size switch in the selected tray is set
to CUSTOM.
UNIT OF MEASURE: Use this option to select the unit of
measure (INCHES or MILLIMETERS) to use when you set
customer paper sizes for the tray 1.
X DIMENSION: Use this item to set the measurement of the
width of the paper (measurement from side to side in the tray).
The options are 3.0 to 12.28 INCHES or 76 to 312 MM.
Y DIMENSION: Use this item to set the measurement of the
length of the paper (measurement from front to back in the
tray). The options are 5.0 to 18.50 INCHES or 127 to 470 MM.
DUPLEX OFF
ON
Appears only for printers that include a built-in duplexer. Set the
value to ON to print on both sides (duplex) or OFF to print on
one side (simplex) of a sheet of paper.
The default setting is OFF.
DUPLEX BINDING LONG EDGE
SHORT EDGE
Changes the binding edge for duplex printing. The menu item
appears only if the printer includes a built-in duplexer and
DUPLEX=ON.
The default setting is LONG EDGE.
OVERRIDE A4/LETTER NO Allows the printer to print an A4-size job on letter-size paper if
A4-size paper is not loaded in the printer (or vice versa).
ENWW Configure Device menu 29