Filter
Top Products
Control panel message Description Recommended action
USB STORAGE FILE OPERATION FAILED
alternates with
Ready
To clear press
The printer received a PJL file system
command that attempted to perform an
illogical operation (for example, to
download a file to a nonexistent directory).
1. Printing can continue.
2. To remove this message from the
display, press
.
3. If the message reappears, a problem
might exist in the software program.
USB STORAGE FILE SYSTEM IS FULL
alternates with
Ready
To clear press
The printer received a PJL file system
command that attempted to store
something on the file system but was
unsuccessful because the file system is full.
1. Use HP Web Jetadmin software to
delete files from the storage device,
and then try again.
2. To remove this message from the
display, press
.
See
HP Web Jetadmin for more information.
USB STORAGE IS WRITE PROTECTED
alternates with
Ready
To clear press
The file system is protected and no new
files can be written to it.
1. To enable writing to the storage
device, use HP Web Jetadmin to turn
off write protection.
2. To remove this message from the
display, turn the printer off and then on.
See
HP Web Jetadmin for more information.
USB STORAGE X REMOVED The USB storage accessory was removed
while the printer was turned on.
1. Turn the printer off.
2. To continue using the USB storage
accessory, reinstall it.
3. Turn the printer on.
USE TRAY X <TYPE> <SIZE>trays
The printer is offering a selection of
alternate media to use for the print job.
1.
Use
and to highlight a
different size or type, and then press
to select the size or type.
2.
Press
to return to the previous size
or type.
See
Configuring trays for more information.
140 Chapter 7 Problem solving ENWW