Filter
Top Products
Control Panel Messages
Chapter 6: Troubleshooting ❖ 6-17
Offset Jam-
Open Rear Cover
Paper has jammed feeding to the OCT. The message alternates with:
Open Offset Door
Clear Paper Path
ACTION: See “OCT Jam” (page 6-29).
Offset Tray Fail
Service Required
The Offset Catch Tray (OCT) has failed. Printing to the OCT cannot continue. You
can however, direct output to the standard output tray.
ACTION: Remove and reinstall the OCT as per the instructions in
Appendix C: Installing and Removing Printer Options. If the problem
persists, contact your dealer or Digital.
Online ___
The printer is online and either processing data or ready to accept print jobs.
ACTION: None.
Open Bin
N
The bin numbered N is unlocked and ready to be pulled out.
ACTION: Pull out the bin.
Open Bins
Two or more bins are unlocked and ready to be pulled out.
ACTION: Pull out the bins.
Open Front Cover
Remove Jam Sheet
A paper jam has occurred. The message alternates with a message that specifies
the location of the jam.
ACTION: See Table 6.4 on page 6-27.
Open Offset Door
Clear Paper Path
A paper jam has occurred. The message alternates with the message:
Offset Jam-
Open Rear Cover
ACTION: See “OCT Jam” (page 6-29).
Table 6.2 Control Panel messages (continued)
Message
Description/Corrective Action
Table 6.2 Page 12 of 19
kug-ch06 Page 17 Thursday, March 6, 1997 4:48 PM