Filter
Top Products
PostScript SIMM
Appendix C: Installing and Removing Printer Options ❖ C-11
4
Select an appropriate SIMM slot to use.
Slots SIM0 (A) and SIM1 (B) are
interchangeable and are used for
installing the PostScript SIMM.
5
Insert the PostScript SIMM vertically into
the appropriate SIMM slot and rotate it
down into position.
6
Make sure that the clips on either side
snap closed to lock the PostScript SIMM
in place.
7
Replace the controller board, sliding it
along the alignment channels. Then
hand-tighten the thumb screws.
kug-appc Page 11 Thursday, March 6, 1997 4:51 PM