Filter
Top Products
Offset Catch Tray (OCT)
C-34 ❖ LN17 and LN17ps Printers User Guide
4
Close the rear cover.
5
Grasping the OCT by the sides, insert its
positioning hook into the outer-most slit
in the exhaust grill on top of the printer.
To avoid damage to the positioning
hook, do not twist the OCT to the
right or left while lowering it into
position.
6
Gently guide the OCT down to the
printer, aligning the OCT connector plug
with the receptacle on the printer.
Make sure the OCT is firmly seated.
7
Flip open the output tray on the OCT.
kug-appc Page 34 Thursday, March 6, 1997 4:51 PM