Filter
Top Products
Control Panel Options
D-16 ❖ LN17 and LN17ps Printers User Guide
Source Mapping
PCL Emulat Menu
Options (Paper Sources):
Upper
Manual
Manual Envelope
Lower
Large Capacity
Envelope Feeder
Maps the PCL paper source commands to the printer’s paper trays.
Each paper source may be mapped to one of the following settings:
Main Tray
Front Tray
Main-Front Tray
Lower 1 Tray
†
Lower 2 Tray
†
Lower 1-Main
†
Lower 2-Main
†
Lower 1-Lower 2
†
Lwr1-Lwr2-Main
†
†
Appears only when one or two optional lower trays are installed.
State Saving
PCL Emulat Menu
PostScript Menu
Off*
On
Reserves memory for saving permanently downloaded fonts and macros, when
the printer switches from using the PCL printer language to using the PostScript
printer language.
• When set to Off, all “permanently” downloaded fonts and macros are
cleared from memory when switching PDLs. They must be downloaded again
when the printer switches back to PCL from PostScript.
• When set to On, “permanently” downloaded fonts and macros are stored in
printer memory. You eliminate the time to download them again when the
printer switches back to PCL.
Temporary fonts and macros are always cleared at the end of every print
job.
State Saving requires 22 MB of memory if the PostScript option is installed. If the
PostScript option is not installed, State Saving may be selected with 18 MB. This
will prevent loss of downloaded PCL fonts and macros if applications change the
setting of Resolution or Page Protection. Enabling State Saving can have an
effect on printing speed. It is recommended that this option be enabled only with
22 MB of printer memory.
Table D.1 Control Panel menu options, settings, and descriptions (continued)
Menu Option,
Location(s),
Setting(s)
Description
Table D.1 Page 14 of 16