Filter
Top Products
Mailbox/Collator
C-40 ❖ LN17 and LN17ps Printers User Guide
7
Attach the power cords.
A Plug one end of the short (60 cm/2 foot)
Mailbox/Collator cord (A) into the AC
receptacle on the printer, and the other
end into the lower AC receptacle on
the Mailbox/Collator.
B Plug one end of the printer power
cord (B) into the upper AC power
receptacle on the Mailbox/Collator, and
the other end into the wall.
8
Power ON the Mailbox/Collator (A) first,
and then power ON the printer.
After warming up for a few minutes, the
Control Panel displays the following
message:
Online
Ready
If any other message is displayed, see
Table 6.2 starting on page 6-6.
9
Consult “Using the Mailbox/Collator”
(page 2-19) for usage instruction.
Note
Keep the original packaging material should you ever need to
remove the option.
kug-appc Page 40 Thursday, March 6, 1997 4:51 PM