Filter
Top Products
Control Panel Options
D-18 ❖ LN17 and LN17ps Printers User Guide
Test Menu
Main Menu
Invokes the Test Menu.
Test Print
Test Menu
Prints a “test pattern” for analysis of print quality over the entire page; intended
for use by the service technician.
The number of Test Prints produced is determined by Copies (page D-4) and
printed from the Default Source (page D-5), both specified in the PCL Emulat
Menu. If the System Menu setting Defaults (page D-4) is USA, Letter (8.5x11)
paper is used; otherwise, A4 paper is used.
Test Print will cause a printer reset, clearing any incomplete jobs.
Tray Switching
PostScript Menu
Off*
Main-Front Tray
Lower 1-Main
†
Lower 2-Main
†
Lower 1-Lower 2
†
Lwr1-Lwr2-Main
†
†
Appears only when one or
two lower trays are
installed.
Controls the sequence of trays the printer uses when printing a page of a
PostScript print job.
The first tray of a sequence is used until it runs out of paper, at which time the
next tray of the sequence is used (if it has the correct size of paper).
Table D.1 Control Panel menu options, settings, and descriptions (continued)
Menu Option,
Location(s),
Setting(s)
Description
Table D.1 Page 16 of 16