Filter
Top Products
Control Panel Messages
6-20 ❖ LN17 and LN17ps Printers User Guide
Press ↑ to Init.
Press
↓ to Abort
Either the hard disk’s partition block cannot be understood or it has a bad high
level format.
This message flashes alternately with either:
Unknown Disk
or
Disk Format Bad
ACTION: Press Up to format the disk or press Down to abort.
*Prntng Simplex*
The printer does not have enough memory to print the job as duplex, and will
print it as simplex.
ACTION: None. The message clears when the next job starts.
Processing...
The printer is processing data from a computer for printing.
ACTION: None.
PS Font List
Printing...
The list of PostScript fonts is printing.
ACTION: Remove the PostScript Font List from the output tray when it has
finished printing.
Ready
The printer is online and waiting for data to print.
ACTION: None.
Remove DuplxUnit
Clear Paper Path
A paper jam has occurred at the Duplex Module. The message alternates with the
message:
Paper Jam-
Open Rear Cover
ACTION: See “Duplex Module Jam” (page 6-30).
Remove EnvFeeder
Open Front Cover
An Envelope Feeder jam has occurred. The message alternates with the messages:
EnvelFeeder Jam-
Remove All Envel
and:
Remove Jam Envel
ACTION: See “Envelope Feeder Jam” (page 6-29).
Table 6.2 Control Panel messages (continued)
Message
Description/Corrective Action
Table 6.2 Page 15 of 19
kug-ch06 Page 20 Thursday, March 6, 1997 4:48 PM