Filter
Top Products
Control Panel Messages
6-18 ❖ LN17 and LN17ps Printers User Guide
Out of Memory
Current PCL job cannot print because it exceeds available memory.
• Even though Auto Continue may be On, you will see the message below for
ten seconds:
Press *
• The printer waits ten seconds, then resumes (in effect, pressing Enter for
you).
The page is ejected from the printer. Depending on the cause of the problem, your
print job may continue or be ended.
ACTION: • Reduce resolution to 600 x 600 dpi.
• Install additional memory.
• Contact your dealer or Digital.
Page Too Complex
In PCL or PostScript, the printing on a page is broken into horizontal bands. When
the Page Protection option is set to Off, as a page is processed, each band has a
limited time to be composed and imprinted on the page. Page Too Complex
means the current page cannot print because there is not enough time to
compose it.
ACTION: Press Enter . The page will be ejected and the print job will
continue. The page that was too complex may be printed on more
than one sheet of paper. To achieve correct printing, set the Page
Protection option to the appropriate page size (or to On for
PostScript) and send the print job again.
Even though Auto Continue may be On, you will see the message
below for ten seconds:
Press *
The printer waits ten seconds, then resumes (in effect, pressing
Enter
for you).
Paper Jam-
Open Front Cover
Paper has jammed at the EP (print) cartridge. The message alternates with:
Remove PrintCart
Clear Paper Path
ACTION: See “Print Cartridge Jam” (page 6-31).
Table 6.2 Control Panel messages (continued)
Message
Description/Corrective Action
Table 6.2 Page 13 of 19
kug-ch06 Page 18 Thursday, March 6, 1997 4:48 PM