Filter
Top Products
Envelope Feeder
C-44 ❖ LN17 and LN17ps Printers User Guide
4
Remove the face plate and store it.
The face plate is re-installed after
removing the feeder.
5
Angle the Envelope Feeder into the
printer.
6
Allow the Envelope Feeder to rest down
at its seated position.
7
Reconnect the power cord and interface
cable(s) and power ON the printer.
After warming up for a few minutes, the
Control Panel displays the following
message:
Online
Ready
If any other message is displayed, see
Table 6.2 starting on page 6-6.
kug-appc Page 44 Thursday, March 6, 1997 4:51 PM