Filter
Top Products
Memory SIMMs
Appendix C: Installing and Removing Printer Options ❖ C-7
8
Replace the power and interface cables and power ON the printer.
After warming up for a few minutes, the Control Panel displays the following message:
Online
Ready
If any other message is displayed, see Table 6.2 starting on page 6-6.
9
Print a Configuration Sheet to verify that the SIMM has been installed properly.
A Press Online to take the printer offline.
B Press Menu , then Down or Up until you see:
Main Menu
Test Menu
C Press Enter and the message display changes to:
Test Menu
Config. sheet
D Press Enter again to print a Configuration Sheet.
E After the Configuration Sheet prints, press Online to put the printer back online.
On the Configuration Sheet, the “Total system memory” value should match the amount
of memory just installed plus the RAM resident on the printer.
kug-appc Page 7 Thursday, March 6, 1997 4:51 PM