Filter
Top Products
Control Panel Messages
6-22 ❖ LN17 and LN17ps Printers User Guide
Reset Ethernet
Please Wait...
Reset Ethernet has been invoked from the Reset Menu.
Returns the Digital Ethernet Network Interface Card to its power-on state and
clears any print job being received, and previously downloaded, temporary fonts,
and macros from memory.
ACTION: Wait for the procedure to finish before taking any further action.
Reset LocalTalk
Please Wait...
Reset LocalTalk has been invoked from the Reset Menu.
Returns the Digital LocalTalk Network Interface Card to its power-on state and
clears any print job being received, and previously downloaded temporary fonts,
and macros from memory.
ACTION: Wait for the procedure to finish before taking any further action.
Reset Menus
Please Wait...
Reset Menus has been invoked from the Reset Menu.
Returns all menu settings except Language, Defaults, PowerSaver, and
Password(s) to their factory setting and clears any print job being received, and
previously downloaded temporary fonts, and macros from memory.
ACTION: Wait for the procedure to finish before taking any further action.
Reset Printer
Please Wait...
Reset Printer or Reset All has been invoked from the Reset Menu.
The printer clears any print job being received, and previously downloaded
temporary fonts and macros from memory, then goes online.
ACTION: None.
ResetToSave Or *
A setting will not take effect until a Reset is performed.
ACTION: Perform a Reset or press Enter to continue without the setting
taking effect.
Temp Font/Macro
The printer was busy processing PCL data from a host system but the job was not
completed since temporary fonts and macros were not deleted. The last page
timeout has expired.
This message appears until:
• Another print job is received.
• The Port Timeout expires and Auto Job End is On.
ACTION: None.
Table 6.2 Control Panel messages (continued)
Message
Description/Corrective Action
Table 6.2 Page 17 of 19
kug-ch06 Page 22 Thursday, March 6, 1997 4:48 PM