Filter
Top Products
Control Panel Options
Appendix D: Control Panel Options ❖ D-3
Table D.1 Control Panel menu options, settings, and descriptions
Menu Option,
Location(s),
Setting(s)
Description
Auto Continue
System Menu
Off*
On
Controls whether the printer resumes printing after system errors occur.
• When set to Off, the printer does not automatically resume. Enter must
be pressed before normal printer operations can continue.
• When set to On, the printer automatically resumes operation after certain
system errors if Enter is not pressed within ten seconds. The On setting is
useful in a networked environment.
Auto Job End
Parallel Menu
Ethernet Menu
Off
On*
Controls automatic ending of a print job that does not finish printing.
With the Hard Disk option installed and Disk Spooling (page D-5) set
to On, Auto Job End is always On (regardless of setting).
Bidirectional
Parallel Menu
Off
On*
Activates two-way communications between the printer and your computer.
The On setting enables the printer to send messages to your computer.
Only set Bidirectional to Off if you have no software application
that supports it.
Bin Full
†
Mailbox Menu
Stop Printing*
Send to Standard
†
Appears only when the
Mailbox/Collator option is
installed.
Determines printer’s behavior when printing an unsecured job and a mailbox bin is
full.
Bin N
†
Mailbox Menu
N = 1 to 10
†
Appears only when the
Mailbox/Collator option is
installed.
Selects Bin 1 to Bin 10 prior to enabling or disabling a password.
Table D.1 Page 1 of 16