Filter
Top Products
Environmental Specifications
H-6 ❖ LN17 and LN17ps Printers User Guide
Operational Safety
Your Digital equipment and supplies were designed and
tested to meet strict safety requirements. These include safety
agency examination, approval, and compliance with
established environmental standards.
Attention to the following notes ensures the continued safe
operation of your equipment.
Always connect the equipment to a properly grounded power
source receptacle. If in doubt, have the receptacle checked by
a qualified electrician.
WARNING: Improper connection of the equipment
grounding conductor can result in electrical shock.
Always follow all warnings and instructions marked on, or
supplied with, the equipment.
Always locate the equipment on a solid support surface with
adequate strength for the weight of the machine.
Always exercise care in moving or relocating the equipment.
Always place the equipment in an area which provides
adequate room area for ventilation and servicing.
Always use the materials and supplies specifically designed
for your Digital equipment. Use of unsuitable materials may
result in poor performance and, possibly, a hazardous
situation.
Never use a ground adaptor plug to connect the equipment to
a power source receptacle that lacks a ground connection
terminal.
Never attempt any maintenance function that is not
specifically described in this documentation.
Never obstruct ventilation openings. These are provided to
prevent overheating.
Never install the equipment near a radiator or any other heat
source.
kug-apph Page 6 Thursday, March 6, 1997 4:57 PM