Filter
Top Products
PostScript SIMM
C-12 ❖ LN17 and LN17ps Printers User Guide
8
Replace the power and interface cables and power ON the printer.
After warming up for a few minutes, the Control Panel displays the following message:
Online
Ready
If any other message is displayed, see Table 6.2 starting on page 6-6.
9
Print a Configuration Sheet to verify that the SIMM has been installed properly.
A Press Online to take the printer offline.
B Press Menu , then Down or Up until you see:
Main Menu
Test Menu
C Press Enter and the message display changes to:
Test Menu
Config. sheet
D Press Enter again to print a Configuration Sheet.
E After the Configuration Sheet prints, press Online to put the printer back online.
The Configuration Sheet should show the PostScript Menu and PostScript version.
10
Install a Digital LN17 PostScript print driver now.
Table 2 in the Setting Up Guide lists the LN17 PostScript printer drivers packaged with your
printer. See the Setting Up Guide for installing driving software.
kug-appc Page 12 Thursday, March 6, 1997 4:51 PM