Filter
Top Products
Digital Network Interface Card (DNIC)
C-54 ❖ LN17 and LN17ps Printers User Guide
6
Lift the card out and away from the slot in
the controller board. Then replace the
screws and faceplate that came with the
printer.
7
Replace the controller board, sliding it
along the alignment channels. Then
hand-tighten the thumb screws.
Store the DNIC in its original
packaging materials, or in a dry,
dust-free place.
8
Replace the power and interface cables
and power ON the printer.
After warming up for a few minutes, the
Control Panel displays the following
message:
Online
Ready
If any other message is displayed, see
Table 6.2 starting on page 6-6.
kug-appc Page 54 Thursday, March 6, 1997 4:51 PM