Filter
Top Products
“C” Group: Intelligent Terminal Functions
Configuring
Drive Parameters
3–28
The input logic convention is programmable for each of the five inputs. Most inputs
default to normally open (active high), but you can select normally closed (active low) in
order to invert the sense of the logic.
NOTE: An input terminal configured for option code 18 ([RS] Reset command) cannot
be configured for normally closed operation.
Intelligent Input Terminal Overview
Each of the five intelligent terminals may be assigned any of the options in the following
table. When you program one of the option codes for terminal assignments C01 to C05,
the respective terminal assumes the function role of that option code. The terminal
functions have a symbol or abbreviation, which we use to label a terminal using that
function. For example the “Forward Run” command is [FWD]. The physical label on the
terminal block connector is simply 1, 2, 3, 4, or 5. However, schematic examples in this
manual also use the terminal symbol (such as [FWD]) to show the assigned option. The
option codes for C11 to C15 determines the active state of the logical input (active high
or active low).
“C” Function
Run-
time
Edit
Defaults DOP,DRW,DOP+
Func.
Code
Name Description
EU/
US
Units
Func.
Code
Name
C11 Terminal 1 active
state
Select logic convention, two
option codes:
00...normally open [NO]
01...normally closed [NC]
✘
00 — F34 IN-TM
O/C-1
C12 Terminal 2 active
state
Select logic convention, two
option codes:
00...normally open [NO]
01...normally closed [NC]
✘
00 — F34 IN-TM
O/C-2
C13 Terminal 3 active
state
Select logic convention, two
option codes:
00...normally open [NO]
01...normally closed [NC]
✘
00 — F34 IN-TM
O/C-3
C14 Terminal 4 active
state
Select logic convention, two
option codes:
00...normally open [NO]
01...normally closed [NC]
✘
00/01 — F34 IN-TM
O/C-4
C15 Terminal 5 active
state
Select logic convention, two
option codes:
00...normally open [NO]
01...normally closed [NC]
✘
00 — F34 IN-TM
O/C-5
Technologies Inc.
Toll Free: voice: 1-877-539-2542 fax: 1-800-539-2542 www.mgitech.com