Filter
Top Products
NetWare Version 4.x RPRINTER Setup
127
You are now logged in to the unit as a root user and can access any npsh
command on the unit.
NOTE: Because npsh.exe makes use of broadcasts, you may have
problems communicating across a router.
NetWare Version 4.x RPRINTER Setup
These steps are for Novell environments using NetWare 4.x (or later) file
servers. To configure a new RPRINTER in a NetWare 4.x network:
1. Specify the Print Server information:
Option 1: If you have TCP/IP available, and this printer NIC already has
an IP address stored within it, you can use the built-in HTML configuration
forms. Please see “Configuration Tools” on page 21 for further details on
setting up TCP/IP on the printer.
If you use this HTML configuration, go to the "Network Configuration"
HTML form:
http://
EthernetInterfaceIPaddress
/networkConf.html
(e.g.:
http://192.75.11.9/networkConf.html
)
and look under the "Novell" section to setup the necessary parameters in
the RPRINTER section:
Check the boxes to enable the following parameters in the Ethernet
interface:
• For Print Server Name, enter the name of the PSERVER.NLM which
will service this printer (e.g.: PServer1).
• For Printer Number, enter the printer number in the previous
PSERVER that will reference this printer (e.g.: 0).
• For Destination, choose one of the logical print queues in the list
(e.g: d1prn).
NOTE: When the IPDS feature is installed, queue name ‘d4prn’ is not
available.
• Submit the form and reboot the NIC.
Option 2: If you have TCP/IP available, and this printer NIC already has
an IP address stored within it, you can use Telnet to execute the