Filter
Top Products
Chapter 5 Configuring on AS/400 as an IPDS Printer
62
IPDS pass through (IPDSPASTHR)
To print SCS files, specify *YES, PSF/400 transforms SCS into IPDS
before printing.
Activate release timer (ACTRLSTMR)
Specifies the point at which the release timer (RLSTMR) is activated. Set
to *NORDYF
.
Release timer (RLSTMR)
Specifies the amount of time to wait before a session or dialog is released
without terminating the writer. The ACTRLSTMR parameter specifies
when this timer is to be activated. Set the parameter to a value at least
equal to the TIMEOUT value on the printer. IBM recommends *SEC15.
Configuring PSF with CRTDEVPRT on V3R7 and Above
This section describes how to create a printer device description.
1. At the AS/400 command line, enter a command in the form:
CRTDEVPRT DEVD(P6400) DEVCLS(*LAN) TYPE(*IPDS)
MODEL(0) LANATTACH(*IP) AFP(*YES) PORT(5001)
FONT(11) FORMFEED(*CONT)
RMTLOCNAME(‘128.9.12.134’)
USRDFNOBJ(AFP/6400NETPRT *PSFCFG)
TEXT(‘IBM 6400 NETWORK PRINTER’)
NOTE: Only use the USRDFNOBJ parameter if it was defined in the
previous procedure (see “Configuring AFP with CRTPSFCFG on
V3R7 or V4R1 (Optional)” on page 60).
2. A completed screen looks like the example shown in Figure 11.