Filter
Top Products
Chapter 5 Configuring on AS/400 as an IPDS Printer
52
Configuring an AS/400 TCP/IP Interface with
ADDTCPIFC
NOTE: Do not enter the IP address of the NIC. Do not set the AS/400
interface address to the same address as the NIC IP address.
Also, do not add the NIC to the AS/400 TCP/IP interface list.
Configuring an Interface for Ethernet
ADDTCPIFC is used to add a TCP/IP interface to AS/400. This step
configures the AS/400 for attachments to a TCP/IP network.
At the AS/400 command line, enter the following command:
ADDTCPIFC INTNETADR (’9.99.15.188’) LIND(ETHLAN)
SUBNETMASK(’255.255.255.0’)
Your completed screen should look like Figure 7.
Figure 7. Example ADDTCPIFC Interface
System: BLDD60
Internet address . . . . . . . . . . . . . . . . . . . . : 9.99.15.188
Subnet mask. . . . . . . . . . . . . . . . . . . . . . . : 255.255.255.0
Line description . . . . . . . . . . . . . . . . . . . . : ETHLAN
Line type. . . . . . . . . . . . . . . . . . . . . . . . . . . : *ELAN
Interface status. . . . . . . . . . . . . . . . . . . . . . : Inactive
Type of service . . . . . . . . . . . . . . . . . . . . . . : *NORMAL
Maximum transmission unit . . . . . . . . . . . . : *LIND
Automatic start . . . . . . . . . . . . . . . . . . . . . . : *YES