Filter
Top Products
Configuring PSF/400 for IPDS on V3R2
57
Configuring AFP with CRTPSFCFG on V3R2
In V3R1, WRKAFP2 was used to specify RMTLOCNAME, PORT, and
ACTTMR, along with other parameters for PSF. In V3R2, CRTPSFCFG
(Create PSF Configuration Object), which replaced WRKAFP2, was used
to specify these same parameters, along with other parameters.
The PSF configuration object created with this command is used by PSF/
400 when printing IPDS files. The object is used by AS/400 V3R2 only if
the object is in the QGPL library and has the same name as the printer
device description. This information overrides the APPC configuration
information specified in the printer device description.
To configure AS/400 for IPDS printing on V3R2:
1. At the AS/400 command line, enter a command in the form:
CRTPSFCFG PSFCFG(P6400) IPDSPASTHR(*YES)
RLSTMR(*SEC15) TEXT(‘IBM 6400 NETWORK
PRINTER’) RMTLOCNAME(‘128.99.12.134’)
PORT(5001)
2. A completed screen looks like Figure 9.