Filter
Top Products
Changing Destination Names
79
The first field requires the IP address for the Ethernet Interface and the
second field must be filled in with an existing destination from the print
server (e.g. d1prn). Otherwise, the Ethernet Interface will not accept this
as a valid network printer. Table 5 outlines the default destinations to
choose from.
NOTE: When the IPDS feature is installed, queue name d4prn is not
available.
This name can be changed to something more meaningful using the built-
in HTML forms. To do this:
1. Load a Web browser on your Windows station and direct it to the URL
“
http://
EthernetInterfaceIPaddress
/
destConf.html
” (e.g. “http://192.75.11.9/
destConf.html
”).
NOTE: If prompted for a “User ID” and password first, type in “
root” for
the ID and press ENTER at the password prompt since there is
no password by default.
2. At the “Print Path Configuration” HTML form that displays, select a
destination link from the top of the page to bring up the appropriate
destination form. By default, you should see a line near the top of the
form showing the destinations listed in Table 5.
3. Once the desired destination HTML form displays, highlight the
“Name” field and type in the new name for this destination.
4. Click on the SUBMIT button when done and physically repower the
print server to make the new setting take effect.
Table 5. Ethernet Interface Default Destinations
Destination Mapped I/O Port
d1prn PRN
d2prn PRN
d3prn PRN
d4prn PRN