Filter
Top Products
HTML Forms
23
Test the setting by performing a
ping
command from an OS/2* command
prompt as follows:
ping
ip_address
where the
ip_address
is the IP address of the printer Ethernet
Interface. If this does not work, repeat the steps to make sure the IP
values on the operator panel are correct. If they are correct, contact your
network administrator for possible network problems.
NOTE: Unlike most operator panel settings, the Ethernet Interface
settings are not saved in Custom Sets; instead, they are stored
directly on the Ethernet Interface adapter.
HTML Forms
The Ethernet Interface settings can be configured over TCP/IP through a
standard Web browser. The Ethernet Interface Web pages provide a
handy way to access some of the commands built in to the print server.
NOTE: If a router is used, make sure a gateway value is configured.
To access the Ethernet Interface home page:
1. Make sure the print server has an IP address and subnet mask so it is
recognizable on your TCP/IP network.
2. Make sure your network station can successfully “
ping” the Ethernet
Interface over the network.
3. Direct your Web browser to the Uniform Resource Locator (URL)
“
http://
IPaddress
”
(e.g. “http://192.75.11.9”).