Filter
Top Products
Configuration Checklist
51
7. Create or verify the existence of an AS/400 TCP/IP interface for
Ethernet. See “Configuring an AS/400 TCP/IP Interface with
ADDTCPIFC” on page 52.
8. The next step depends on your AS/400 release. Configure your
printer with one of these procedures:
• “Configuring PSF/400 for IPDS on V3R2” on page 54
• “Configuring PSF/400 for IPDS on V3R7 and Above” on page 60
9. Verify the printer is ON using the VFYCFG command.
10. Verify that TCP/IP has been started using the STRTCP command.
11. Test your configuration. See “Verifying the IPDS Configuration on AS/
400” on page 65.
12. To share the printer on the network, verify that the necessary
parameters have been set correctly. See “Sharing the AS/400 Printer
on the Network” on page 67.
13. If you have problems, refer to “AS/400 Troubleshooting” on page 70.