Filter
Top Products
Printer Sharing Parameters
69
V3R7
V4R1
CRTPSFCFG
CHGPSFCFG
RLSTMR *SEC15 Specifies the amount of time to
wait before a session or dialog is
released without terminating the
writer. The ACTRLSTMR
parameter specifies when this
timer is to be activated. Set the
parameter to a value at least
equal to the TIMEOUT value on
the printer. IBM recommends
*SEC15.
V3R7
V4R1
CRTDEVPRT
CHGDEVPRT
ACTTMR *NOMAX The value specifies the number
of seconds that PSF/400 will wait
for a printer to respond to an
activation request. If only one
system will be using the printer,
use the default value (170
seconds). If more than one
system will be using the printer,
set the value to *NOMAX, which
causes PSF/400 to wait
indefinitely for a response to an
activation request.
Table 4. Printer Sharing (continued)
AS/400
Version
Where Set Parameter
Recommended
Value
Description