Filter
Top Products
Miscellaneous Commands
175
start fox|tts|loopb prn
start fox prn
Begin a debugging test on one of the I/O ports on the Ethernet
Interface. The tests available are:
fox A continuous stream of text sent to the attached
printer. This is a good test for troubleshooting
hardware as long as the attached printer supports
text output.
tts A continuous stream of Gandalf 400C TTS-
compatible text sent to the attached printer.
loopb Loopback test. Any input characters from the device
attached to the I/O port is echoed back.
stop prn
stop prn
Stop an output test on an I/O port.
disable
ioport
|
destination
disable prn
Disable an
I/O port
so that queued jobs are not printed, or disable a
destination
so jobs can not be queued to it.
enable
ioport
|
destination
enable prn
Enable an
I/O port
so that queued jobs are printed, or enable a
destination
so jobs can be queued to it.
close tcp
TCPindexnumber
close tcp 3
Force a TCP/IP connection between a TCP/IP host and the Ethernet
Interface to close. The
TCPindexnumber
can be retrieved from
“debug tcp” output.