Filter
Top Products
Chapter 5 Sharing the AS/400 Printer on the Network
68
V3R2 CRTPSFCFG
CHGPSFCFG
ACTRLSTMR *SEC15 Specifies the amount of time to
wait before a session or dialog is
released without terminating the
writer. The ACTRLSTMR
parameter specifies when this
timer is to be activated. Set the
parameter to a value at least
equal to the TIMEOUT value on
the printer. IBM recommends
*SEC15.
V3R2 CRTPSFCFG
CHGPSFCFG
ACTTMR *NOMAX The value specifies the number
of seconds that PSF/400 will wait
for a printer to respond to an
activation request. If only one
system will be using the printer,
use the default value (170
seconds). If more than one
system will be using the printer,
set the value to *NOMAX, which
causes PSF/400 to wait
indefinitely for a response to an
activation request.
V3R7
V4R1
CRTPSFCFG
CHGPSFCFG
ACTRLSTMR *NORDYF Specifies the point at which the
release timer (RLSTMR) is
activated. Set to *NORDYF. This
means that the release timer is
activated when there are no
spooled files in the printer’s
output queue with a status of
RDY and the last page of the last
spooled file processed has
printed. *NORDYF is used so
that all files with a status of RDY
are printed before releasing the
session (which does not
terminate the writer).
Table 4. Printer Sharing (continued)
AS/400
Version
Where Set Parameter
Recommended
Value
Description