Filter
Top Products
Spooled Print File Remains in PND Status
71
Spooled Print File Remains in PND Status
Check the output queue with the command:
WRKOUTQ
queuename
This typically indicates that PSF/400 is waiting for a response from the
printer. This can be verified by displaying the QSPL subsystem,
WRKACTJOBSBS (QSPL). If the status of the PDJ job for the printer is
SELW, then PSF/400 is waiting for a response from the printer. Make
sure that the printer is online and in READY status and that all network
connections (for example, routers) between the AS/400 and the printer
are active.
Spooled Files Disappear Without Printing
To resolve this problem:
• Check that the correct printer queue name and correct IP address
have been used.
• “
ping
” the IP address. If the “
ping
” is successful, disconnect the
network cable from the printer/print server, and “
ping
” the address
again. If the “
ping
” is still successful, there is another printer with that
IP address on the network.
Data is Being Clipped
To resolve this problem, you may want to set the PSC (Page Size
Control) parameter to *YES in the CRTPSFCFG command (V3R2, V3R7,
or V4R1).