Filter
Top Products
store Commands
161
store pserver smb workgrp
newworkgroupname
store pserver smb workgrp eng
Define a different Windows workgroup as defined by
newworkgroupname
for the Ethernet Interface to be visible within.
By default, the print server only comes up within the group called
“WORKGROUP.”
store pserver from default
Set all general print server settings back to factory defaults.
store pserver from current
Store all current general print server settings to flash memory so they
are retained after a power cycle. This ensures all current settings
match what is stored in flash memory.
store rprinter add|del
printservername printernumber
destination
store rprinter add pserver1 0 d1prn
Add or delete the RPRINTER settings on the Ethernet Interface for a
Novell environment. The
printservername
must be the name of an
existing PSERVER.NLM on your Novell file server. The
printernumber
is the printer number within this PSERVER.NLM. The
destination
is the queue on the Ethernet Interface where the print
jobs will be sent to.
store tcpip
ifnum
addr
IPaddress
store tcpip 1 addr 192.75.11.9
Store the IP address for the Ethernet Interface.
store tcpip
ifnum
mask
netmask
store tcpip 1 mask 255.255.255.0
Store the subnet mask for the Ethernet Interface.
store tcpip
ifnum
opts [[-]rarp] [[-]bootp]
store tcpip 1 opts -rarp -bootp
Enable or disable the automatic RARP and BOOTP requests for IP
addresses upon bootup. If you are storing the Ethernet Interface
TCP/IP network settings within the device, you will not need to rely on
RARP or BOOTP for new settings.