Filter
Top Products
Chapter 13 Complete Command List
160
store pserver tcpsocket
TCPportnumber
port
newTCPportnumber
store pserver tcpsocket 4000 port 5000
Change a pre-defined
TCPportnumber
on the Ethernet Interface to a
newTCPportnumber
. The default number is 9100 for prn.
store pserver tcpsocket
TCPportnumber
dest
destination
store pserver tcpsocket 5000 dest d1prn
Assign a pre-defined
TCPportnumber
to a particular
destination
on
the Ethernet Interface. Therefore, if you are using a print method that
sends jobs directly to a TCP port number, you still have the option to
process the job data through this destination setting.
store pserver novell passwd
password
store pserver novell passwd mplex
Store the
password
for the Ethernet Interface to use when logging in
to a Novell file server. This
password
would have to match one set
on the file server.
store pserver novell user name
username
store pserver novell user name micro1
Define a
username
on the Ethernet Interface to be used when it logs
into a Novell file server to find information. This
username
must
match a user pre-defined on the Novell file server.
store pserver novell user passwd
password
store pserver novell user passwd mplex2
Define a
password
on the Ethernet Interface for the Novell user
already defined. This
password
must match the one stored on the
Novell file server. Passwords are optional as long as there is not one
defined on the file server for the user.
store pserver novell fserver add|del
fileservername
store pserver novell fserver add fs1
Add or remove a server entry on the Ethernet Interface for the Novell
file server it will be servicing.