Infortrend A16E-G2130-4 Power Supply User Manual


 
EonStor A16E-G2130-4 Installation and Hardware Reference Manual
The front panel shown in Figure 1-3 accommodates the following
components:
Drive bays with drive tray canisters: The drive bays house the
A16E-G2130-4 hard drives.
Forearm handles: The subsystem has right and left handles for
easier rackmounting and handling.
1.1.2.4 Hard Drive Numbering
The front section of the A16E-G2130-4 enclosure houses sixteen (16) hard
drives in a 4x4 configuration. When viewed from the front, the drive bays
(slots) are numbered 1 to 16 from left to right and then from top to bottom.
Figure 1-4: Hard Drive Numbering
1.1.2.5 Rear Panel Overview
The rear section of the A16E-G2130-4 subsystem is accessed through the
rear panel and is reserved for a single RAID controller module, one (1)
optional BBU, two (2) power supply units (PSUs), and two (2) cooling
modules.
A rear view is of the subsystem is shown below. Descriptions of each rear
panel component are given below:
Figure 1-5: A16E-G2130-4-2 Rear View
The rear panel shown in
Figure 1-5 accommodates the following
components:
RAID controller module: The RAID controller module manages
all functionalities provided with the subsystem, and all interface
Product Overview
1-4