Filter
Top Products
EonStor A16E-G2130-4 Installation and Hardware Reference Manual
2.10 Rack/Cabinet Installation
PN: IFT-9273CSlide32
PN: IFT-9273CSlide36
The subsystem is designed to fit into a variety of 19-inch rack cabinets or
racks. Make sure you have an appropriate site location and cables prepared
with adequate lengths to connect to mains and other devices.
The subsystem should be installed in the rack or cabinet before the hard
drives and the drive trays are installed. If the drive trays with the associated
hard drives are installed, the subsystem will be too heavy to mount into a
rack or cabinet. When installing the subsystem into a rack or cabinet it is
advisable that two (2) people assist in the mounting process.
For details on the use of the rackmount rails, please refer to the installation
instructions that came with them.
Rack/Cabinet Installation
2-14