Filter
Top Products
Chapter 5: Subsystem Maintenance and Upgrading
Figure 5-15: Front View of an Individual Drive Tray
Step 3. Open the front flap on the drive tray. Push the release button on the
front of the drive tray. The front flap will automatically swings up into
position.
Figure 5-16: Opening the Drive Tray Front Flap
Step 4. Remove the drive tray by pulling it one inch away from the drive
bay. Wait for at least 30 seconds for the disk drive to spin down (if
the disk drive is removed for a different purpose, e.g., cloning the
members of a logical drive or Copy & Replace), and then gently and
carefully withdraw the drive tray from the chassis.
Replacing a Failed Hard Drive 5-21